Introducing the Clip rail track which is ideal when using warm water underfloor heating within a screed or concrete floors. The clip rail track is mounted on to the vapour – insulation with using the self adhesive rail backing and held in place whilst the underfloor pipework is clipped in place. Holding Pins can also be used if required. Supplied in 1 metre lengths simply push together each length to extend and snap off at pre-scored points to the required length.
Underfloor Heating Clip Rail Track 100m Self Adhesive Taped for 14-16mm Pipe
Availability: 61 in stock
Introducing the Clip rail track which is ideal when using warm water underfloor heating within a screed or concrete floors. The clip rail track is mounted on to the vapour – insulation with using the self adhesive rail backing and held in place whilst the underfloor pipework is clipped in place. Holding Pins can also be used if required. Supplied in 1 metre lengths simply push together each length to extend and snap off at pre-scored points to the required length.
Technical Data:
- Dimensions: L1000 x W40 x H25mm
- Colour: Black
- Fixing: Self Adhesive Tape (colour may vary), holding pins can also be used to secure the clip rail.
- Material: Polypropylene
- Suitability: For 14 – 16mm Pipe
- Pipe Spacing: 50, 100, 150, 200mm and so on.
- Push and Snap Function
If your total area is 20m² and you multiply it by 1.5 – you would calculate the following:
For example: 20m² x 1.5 = 30 lengths
This means you would need a total of 30 lengths of the heating product to adequately heat the specified area. If you need any further assistance or have questions about other calculations or context about any underfloor heating products, do not hesitate to call us!
